В корзине нет продукты
|
|||||||
| Quantity | 4 | ||||||
| Crankshaft | 47.973 / 47.955 | ||||||
| Housing | 51.001 / 51.013 | ||||||
| Max Wall | 1.504 | ||||||
| Max Length | 17.000 |
|
|||||||
| Quantity | 4 | ||||||
| Crankshaft | 47.973 / 47.955 | ||||||
| Housing | 51.001 / 51.013 | ||||||
| Max Wall | 1.504 | ||||||
| Max Length | 19.101 |
| Pairs & PN |
|
||||||
|---|---|---|---|---|---|---|---|
| Quantity | 5 | ||||||
| Crankshaft | 54.981 / 54.955 | ||||||
| Housing | 58.943 / 58.969 | ||||||
| Max Wall | 1.981 | ||||||
| Max Length | 19.101 |
|
Product detailed specification |
|
|
Model number |
BMEVI-1054-HS |
|
Head diameter |
28.00mm |
|
Stem diameter |
5.95mm |
|
Length |
114.90mm |
|
Material |
Sodium filled |
|
Fits for |
BMW E60, E90, E91, E92, E93, E82, E88, E89, X6, Z4, F01 (N54B30) |
|
Product detailed specification |
|
|
Model number |
BMEVI-1054-HS-1 |
|
Head diameter |
28.50mm |
|
Stem diameter |
5.95mm |
|
Length |
114.90mm |
|
Material |
Sodium filled |
|
Fits for |
BMW E60, E90, E91, E92, E93, E82, E88, E89, X6, Z4, F01 (N54B30) |
|
Product detailed specification |
|
|
Model number |
BMIVN-1054S-1 |
|
Head diameter |
31.90mm |
|
Stem diameter |
4.96mm |
|
Length |
106.70mm |
|
Material |
Black nitrided stainless steel |
|
Fits for |
BMW E60, E90, E91, E92, E93, E82, E88, E89, X6, Z4, F01 (N54B30) |
|
Product detailed specification |
|
|
Model number |
BMIVN-1054S |
|
Head diameter |
31.40mm |
|
Stem diameter |
4.96mm |
|
Length |
106.70mm |
|
Material |
Black nitrided stainless steel |
|
Fits for |
BMW E60, E90, E91, E92, E93, E82, E88, E89, X6, Z4, F01 (N54B30) |
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
|
Product detailed specification |
|
|
Bore size |
84.50mm |
|
Stroke |
89.60mm |
|
JE Pistons compression ratio (CR) |
9.5:1 |
|
OEM compression ratio (CR) |
10.2:1 |
|
Dome volume (CC) |
-22.00cm3 |
|
Compression height (CH) |
31.60mm |
|
Pin diameter |
22mm |
|
Features |
Accepts Turbo and Nitrous; FSR skirt |
|
Fits for |
BMW - 3.0 24V Turbo (N54B30) |
|
Product detailed specification |
|
|
Bore size |
84.00mm |
|
Stroke |
89.60mm |
|
JE Pistons compression ratio (CR) |
9.5:1 |
|
OEM compression ratio (CR) |
10.2:1 |
|
Dome volume (CC) |
-21.3cm3 |
|
Compression height (CH) |
31.60mm |
|
Pin diameter |
22mm |
|
Features |
Accepts Turbo and Nitrous; FSR skirt |
|
Fits for |
BMW - 3.0 24V Turbo (N54B30) |
