BMW E92, Z4, F01 3.0 N54B30 USA FCP intake valve guide kit 5mm

Part number: FCPVGB/N54/12I
Kit includes 12 pcs. of intake valve guides
Material: bronze
Outer diameter: 10.04mm
Inner diameter: 5.00mm
Length: 42mm
For 5mm intake valves!
BMW E90, E91, E92, E93, E82, E88, E89, X6, Z4, F01 - 3.0 (N54B30)

149,00 €

Доступность:0 шт.

Notify me when available

Вам также может понравиться

BMW 3.0 N54B30 / N55B30 / S55B30 Supertech conical spring kit SPRK-FE20N54-BE

Spring data:
Seat pressure - 75lbs @ 36.50mm
Open (lift) pressure - 155lbs @ 10.00mm
Spring coil bind - 23.20mm
Max lift - 12mm
Rate - 8 lbs./mm
Wide end spring outer diameter - 24.40mm
Wide end spring inner diameter - 17.60mm
Narrow end spring outer diameter - 21.00mm
Narrow end spring inner diameter - 14.30mm

Set includes:
Single springs - 24 pcs. SPR-FE20N54-BE
Titanium retainers - 12 pcs. RET-BMN54-TI (5mm)
Titanium retainers - 12 pcs. RET-BMN54-TE (6mm)

1 149,00 €

BMW 3.0 N54B30 Supertech Sodium filled exhaust valve BMEVI-1054-HS STD

Product detailed specification
Model number	BMEVI-1054-HS
Head diameter	28.00mm
Stem diameter	5.95mm
Length	114.90mm
Material	Sodium filled
Fits for	BMW E60, E90, E91, E92, E93, E82, E88, E89, X6, Z4, F01 (N54B30)

63,00 €

BMW 3.0 N54B30 Supertech Sodium filled exhaust valve BMEVI-1054-HS-1 +0.5mm

Product detailed specification
Model number	BMEVI-1054-HS-1
Head diameter	28.50mm
Stem diameter	5.95mm
Length	114.90mm
Material	Sodium filled
Fits for	BMW E60, E90, E91, E92, E93, E82, E88, E89, X6, Z4, F01 (N54B30)

63,00 €

BMW 3.0 N54B30 Supertech black nitrided intake valve BMIVN-1054S-1 +0.5mm

Product detailed specification
Model number	BMIVN-1054S-1
Head diameter	31.90mm
Stem diameter	4.96mm
Length	106.70mm
Material	Black nitrided stainless steel
Fits for	BMW E60, E90, E91, E92, E93, E82, E88, E89, X6, Z4, F01 (N54B30)

33,00 €

BMW 3.0 N54B30 Supertech black nitrided intake valve BMIVN-1054S STD

Product detailed specification
Model number	BMIVN-1054S
Head diameter	31.40mm
Stem diameter	4.96mm
Length	106.70mm
Material	Black nitrided stainless steel
Fits for	BMW E60, E90, E91, E92, E93, E82, E88, E89, X6, Z4, F01 (N54B30)

33,00 €

BMW 3.0 N54B30 N55B30 S55B30 ACL Race connecting rod bearings 6B1584H-STD

Part number 6B1584H-STD
ACL Race Series connecting rod bearings
BMW - 3.0 (N54B30, N55B30, S55B30)

209,00 €

BMW 3.0 N54B30 N55B30 S55B30 ACL Race connecting rod bearings 6B1584HX-STD

Part number 6B1584HX-STD (+0.001" extra clearance)
ACL Race Series connecting rod bearings
BMW - 3.0 (N54B30, N55B30, S55B30)

209,00 €

BMW 3.0 N54B30 N55B30 Athena Cooper Ring cylinder head gasket 86x1.5mm 330074R

Athena Racing 330 series Cooper Ring cylinder head gasket set.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330074R
Gasket thickness: 1.50mm
Bore size: 86.00mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

299,00 €

Cometic BMW 3.0 N54 2008-16 MLX cylinder head gasket 85x1.1mm C15257-044

COMETIC MLX (Multi-Layer Stopper) gaskets utilize an integrated stopper layer for combustion chamber sealing and improved clamp load around the cylinder without increasing bore distortion. MLX technology can be found in some head gaskets and are made from the same materials as our MLS Head Gaskets. No sealants or re-torque required.

249,01 €

BMW 135i 335i 3.0 N54B30 FCP H-beam steel connecting rods 145mm for oem pistons

Product detailed specification
Manufacturer: FCP Engineering
Model: FCPRHB14553622T
Profile: H-beam
C to C: 145mm
Big end diameter: 53.6mm
Pin diameter: 22mm (Tapered small end)
Quantity: 6 pcs., 12 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1000HP (6 cylinder)
Advertised RPM rating: 9000RPM
BMW E90, E91, E92, E93, E82, E88, E89, X6, Z4, F01 (N54B30)
Fits OEM pistons

639,00 €

BMW 135i 335i N54B30 Ultra series JE Pistons kit 84mm CR 9.5 367877

Product detailed specification
Bore size	84.00mm
Stroke	89.60mm
JE Pistons compression ratio (CR)	9.5:1
OEM compression ratio (CR)	10.2:1
Dome volume (CC)	-21.3cm³
Compression height (CH)	31.60mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous; Ultra series
Fits for	BMW - 3.0 24V Turbo (N54B30)

1 649,00 €