кликните сюда открыть старую версию сайта
Все категории
Parts by Car
Parts by Car
Каталог запчастей:


Kolbenschmidt plain bearing measuring tape/plastic gauge 50009880

Part number 50009880.
Kolbenschmidt plain bearing measuring tape / plastic gauge kit (10 pcs.).
Measuring strips for the determination of bearing clearance for plain bearings

13,00 €
ARP connecting rod bolt stretch gauge 100-9942
This gauge has been developed to provide optimum accuracy in determining the correct pre-load in the installed rod bolt. The products main purpose is to obtain the proper torque load when installed in the engine, and monitoring the condition of the bolt while in use. This is particularly useful if an engine is internally monitored regularly.
279,00 €
ACL plain bearing measuring tape/flexigauge AG-1 (Green)
  1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
  2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
  3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
  4. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
  5. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2)
  6. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.

15,00 €
Subaru WRX STi EJ20 EJ205 EJ25 EJ257 FCP H-beam steel connecting rods 130.50mm
Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHS13055523
Profile: H-beam
C to C: 130.50mm
Big end diameter: 55mm
Pin diameter: 23mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 600HP (4 cylinder)
Advertised RPM rating: 9000RPM

Subaru WRX STi - 2.0 2.5 (EJ20, EJ205, EJ25, EJ257)
399,00 €
Subaru BRZ / Toyota GT86 H-beam Supertech steel connecting rods 129.38mm
Product detailed specification

Manufacturer: Supertech
Model: CR-FA20-H129.3
Profile: H-beam
C to C: 129.30mm
Big end diameter: 53mm
Pin diameter: 22mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 700HP (4 cylinder)
Advertised RPM rating: 9000RPM

Subaru BRZ / Scion FR-S / Toyota GT86 - 2.0 16V (FA20, FA20D, FA20F)
649,00 €
FCP engineering Toyota Supra 2JZGTE 3.4L Stroker kit

Kit includes:

1. Custom billet 94.00mm stroke crankshaft
2. Real street performance Billet main cap set
3. FCP Engineering forged H-beam connecting rod kit
4. Je-pistons kit (Bore size 86.50mm CR 9.5:1)
5. ACL main bearing set
6. ACL connecting rod bearing set
7. ACL thrust washers kit
Kit can be sold separately on request (Crankshaft, pistons etc.)

4 999,00 €
Permatex Ultra Slick assembly lubricant for engine bearings 118ml

Part number 81950
Permatex Ultra Slick assebly lubricant, lube oil for engine bearings.
Capacity 118 ml

12,00 €