кликните сюда открыть старую версию сайта
Audi / VW 1.8-2.0 20V FCP racing solid lifters (followers, tappets)

Lifter data:
20 pcs. FCP Engineering mechanical racing solid lifters.
Forged steel, nitride hardened surface, HRC 50.
Installed tappet height to camshaft must be adjusted with lash caps (not included).
Lifter adjustment requires:
12pcs. 6mm lash caps
8pcs. 7mm lash caps


Intake lifter data (12 pcs.):
Outer diameter - 23.97mm
Inner diameter - 23.97mm
Outer height - 24.20mm
Stem length - 15.00mm
Stud diameter - 6.00mm
Weight - 26g

Exhaust lifter data (8 pcs.):
Outer diameter - 33.47mm
Inner diameter - 31.50mm
Outer height - 26.00mm
Stem length - 15.00mm
Stud diameter - 7.00mm
Weight - 43g

375,00 €
Audi S2 RS2 2.2T 20V 3B AAN FCP H-beam steel connecting rods 144mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHA14450620-5
Profile: H-beam
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 20mm
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 700HP (5 cylinder)
Advertised RPM rating: 9000RPM
Audi 90, Coupe - 2.3 20V (7A)
200, S2, RS2, S4, S6 - 2.2 20V Turbo (3B, ABY, ADU, AAN)
 

1 025,00 €
Audi S4 RS4 2.7T 2.8 3.0 30V FCP valve spring and retainer kit
Valve springs data
Installed seat pressure:

Intake valve spring - 25kg, exhaust double valve spring - 36kg
Load:
Intake - 56kg@10.5mm, exhaust - 84kg@10.5mm
Max lift:
intake - up to 11mm, exhaust - up to 12.7mm
Made from chrome-silicon steel SAE9254-V
18 pcs. intake valve single springs
12 pcs. exhaust valve double springs
18 pcs. intake titanium retainers
12 pcs. exhaust titanium retainers
Fits all V6 2.7 2.8 3.0 30V Turbo/NA Audi / VW engines.
With this set the risk of valve flutter and a possible engine failure is minimized.  
Recommended for engines with series and racing camshafts and over 7600 RPM. Titanium retainers are very strong and light, they help to eliminate valve float. Weight is only 9 and 4 g.
749,00 €
Opel 2.0 Turbo Z20LET/LEH/LER FCP Y20LET forged pistons CR 8.5 86.5mm
Part number: FCPPOZ865085
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 86.50mm
Compression ratio (CR): 8.5:1
Compression height: 30.40 mm
Pin diameter: 21mm
Stroke: 86.00mm
Opel / Vauxhall - 2.0 16V Turbo (Z20LET, Z20LER, Z20LEH, Y20LET)

Connecting rod lengh must be 143.1mm
649,00 €
FCP engineering Toyota Supra 2JZGTE 3.4L Stroker kit

Kit includes:

1. Custom billet 94.00mm stroke crankshaft
2. Real street performance Billet main cap set
3. FCP Engineering forged H-beam connecting rod kit
4. Je-pistons kit (Bore size 86.50mm CR 9.5:1)
5. ACL main bearing set
6. ACL connecting rod bearing set
7. ACL thrust washers kit
Kit can be sold separately on request (Crankshaft, pistons etc.)

4 999,00 €