Fuel pumps

Bosch INLINE fuel pump specs:

Bosch part number: 0 580 254 044
Minimum current: 12 V
Operating pressure: 94 PSI (6.5 Bar)
Minimum flow @ outlet: 80 GPH (300 LPH)
Fuel pump location: in line
High temperature reduction: 8 GPH (30 LPH)
Weight: 930 g (2.05 Pounds)
Inlet: 18x1.5
Outlet: 12x1.5

Walbro Part Number: F90000267 (includes full install kit)
Type: Universal in-tank fuel pump
Fuel: Gasoline / E85
Flow Rate: 450LPH
Outer diameter (small): 39mm
Outer diameter (large): 50mm
Outer diameter: 11mm / 9mm
Length: 130mm

• Award-winning OE technology.
• Outperforms all current market in-tank fuel pumps.
• Designed for engines up to around 800bhp on 12 volts, 1000bhp on 13,5 volts.
• High pressure, high flow performance OEM technology designed and developed for E85 and gasoline.
• Dual channel turbine design for maximum efficiency under high pressure and high temperature applications.

Walbro part number: GSS342 (includes full install kit)
Type: universal electric in-tank fuel pump
Fuel: gasoline
Flow rate: 255LPH
Noise level: very quiet
Minimum voltage: 12V
Fuel pump dimensions:
Length: 120mm (overall)
Length: 80mm (case only)
Diameter: 39.5mm
Inlet width: 11mm
Outlet width: 8mm
Operating pressure: 15-90 PSI - final fuel pressure set by regulator
Pushing a whopping 255 liters of fuel per hour at high pressure
High pressure, high performance universal in-tank fuel pump for the extreme automotive enthusiast
All Walbro fuel pumps are brand new and 100% authentic Walbro. Made in the USA
Design based on TI Automotive OEM Chevrolet Corvette and Dodge Viper technology

Enjoy the highest output on today’s market with Walbro's new DCSS 39/50 in-tank fuel pump. Able to support an aggressive 700+ horsepower, with a super charger, this innovative dual pumping channel design delivers maximum pressure with superior fuel flow. Operating in both petrol and E85, this fuel pump comes with a check valve to avoid system leak-down and extended cranking at start-up. This superior design results in improved hot fuel flow, as well as minimal noise, increasing efficiency by 20% over conventional pumps, delivering unparalleled performance.

Specifications:

• Fuel: Petrol & E85
• Horsepower: 900+ at 60PSI, naturally aspirated applications
• Over All Pump Length: 131mm
• Main Housing Diameter: 39mm
• Lower Housing Diameter: 50mm
• Fuel Inlet Diameter: 11mm OD
• Fuel Outlet Diameter: 11mm OD
• Flow Rate: 470lph @ 40psi (120+ gph)
• Test Voltage: 13.5 Volts

Walbro 535 lph Competition In Tank Fuel Pump Kit F90000295

• Outperforms all current market in-tank fuel pumps
• Designed for engines with up to 985hp
• Award Winning OE Technology
• High Pressure, High flow performance
• OEM technology designed and developed for E85.
• All pumping components have been validated to OEM specification for approved use in E85/Flex fuel application

Fittings In (mm):- 11
Fittings Out (mm):- 9
Pump:- Ti Automotive (Walbro) F90000295
Voltage DC:- 12
Pulse Width Modulation Compatible:- Yes
One Way Valve:- No
Flow Ltr/Hr (Max):- 535
Flow Ltr/Hr @ 3 Bar (44psi):- 456
Flow Ltr/Hr @ 5 Bar (73psi):- 336
Max Pressure (Bar):- 7.9

Length (mm):- 130
Diameter (mm):- 50 / 39
Weight (Kg):-0.430

• Low Amp Draw
• Capable of handling 1000hp+ under standard operating conditions

Fittings In (mm):-19
Fittings Out (mm):- 11

Body Diameter :-  38.25mm
Length (Overall) :- 155
Pump:- BKS1002
Voltage DC:- 12
Flow Ltr/Hr (Max):-594
Flow Ltr/Hr @ 3 Bar (44psi):- 525
Flow Ltr/Hr @ 5 Bar (73psi):- 465
Flow Ltr/Hr @ 7 Bar (73psi):- 375
Max Pressure:- 8.2