кликните сюда открыть старую версию сайта
Все категории
Parts by Car
Go
Parts by Car
Go
Каталог запчастей:
Категории

FCP жесткие толкатели

Ford Sierra Escort RS Cosworth 2.0 16V YB FCP racing solid lifters

Lifter info:
Outer diameter - 34.97mm
Inner diameter - 33.10mm
Outer height - 26.30mm
Stem length - 14.70mm
Stud diameter - 7.00mm
Weight - 50g
16 pcs. FCP Engineering racing mechanical solid lifters.
Forged steel, nitride hardened surface, HRC 50.
Installed follower height to camshaft must be adjusted with lash caps (not included).

299,00 €
Opel / Vauxhall 1.6 1.8 2.0 16V C20LET Z20LET FCP racing solid lifters (cam...

Lifter data:
Outer d
iameter - 31.97mm

Inner diameter - 30.00mm
Outer height - 26.30mm
Stem length - 14.70mm
Stud diameter - 7.00mm
Weight - 40g
16 pcs. FCP Engineering racing mechanical solid lifters.
Forged steel, nitride hardened surface, HRC 50.
Installed follower height to camshaft must be adjusted with lash caps (not included).

299,00 €
Opel 3.0 3.6 4.0 24V FCP racing solid lifters (cam followers, tappets)

Lifter data:
Outer diameter - 31.97mm

Inner diameter - 30.00mm
Outer height - 26.30mm
Stem lenght - 14.70mm
Stud diameter - 7.00mm
Weight - 40g
24 pcs. FCP Engineering racing mechanical solid lifters.
Forged steel, nitride hardened surface, HRC 50.
Installed follower height to camshaft must be adjusted with lash caps (not included).

375,00 €
BMW E30 318is 1.8 16V M42 FCP mechanical racing solid lifters

Lifter data:
Outer diameter - 35.00mm

Inner diameter - 33.10mm
Outer height - 26.00mm
Stem length - 14.70mm
Stud diameter - 7.00mm
Weight - 50g
16 pcs. FCP Engineering racing mechanical solid lifters.
Forged steel, nitride hardened surface, HRC 50.
Installed follower height to camshaft must be adjusted with lash caps (not included).

299,00 €
BMW E30 318is 1.8 16V M42 FCP mechanical racing solid lifter kit

Outer diameter - 32.97mm
Inner diameter - 31.00mm
Outer height - 26.50mm
Stem length - 13.90mm
Stud diameter - 7.00mm
16 pcs. FCP Engineering racing mechanical solid lifters
Forged steel, nitride hardened surface, HRC 50
Installed follower height to camshaft must be adjusted with lash caps (not included)

299,00 €
BMW E30 E36 E34 E39 E60 2.0 2.3 2.5 2.8 3.0 M50 M52 M54 FCP racing solid...

Outer diameter - 35.00mm
Inner diameter - 33.10mm
Outer height - 26.00mm
Stem length - 14.70mm
Stud diameter - 7.00mm
24 pcs. FCP Engineering racing mechanical solid lifters
Forged steel, nitride hardened surface, HRC 50
Installed follower height to camshaft must be adjusted with lash caps (not included)

580,80 €
Audi / VW / Seat / Skoda 1.8T 20V AEB Gates Racing timing belt

Product info:

Width: 25mm
Number of tooth: 153
Gates' timing belts offer a precision fit with easy installation and no interference engine damage - exactly what you've come to expect from the worldwide leader in timing belts.
- Tensile cord reinforced with premium, high-strength glass cords
- Gripping teeth with aramid fiber technology and high saturation HNBR elastomeric composites for exceptional durability and heat resistance.
- Wear-resistant tooth jacket supported by reinforced nylon fabric and double-tooth stability.
The superior construction of Gates timing belts makes them 300 percent stronger than the standard aftermarket belt while providing up to three times the heat resistance.

119,79 €
VW / Audi 1.6 1.8 2.0 8V FCP racing solid lifters (followers, tappets)

Lifter info:
Outer diameter - 34.97mm
Inner diameter - 33.10mm
Outer height - 26.30mm
Stem length - 14.70mm
Stud diameter - 7.00mm
Weight - 50g

8 pcs. FCP Engineering mechanical racing solid lifters.
Forged steel, nitride hardened surface, HRC 50.
Installed follower height to camshaft must be adjusted with lash caps (not included).

149,00 €
VW / Audi 2.0 2.2 10V FCP racing solid lifters (followers, tappets)

Lifter data:
Outer diameter - 34.97mm

Inner diameter - 33.10mm
Outer height - 26.30mm
Stem lenghth - 14.70mm
Stud diameter - 7.00mm
Weight - 50g
10 pcs. FCP Engineering racing mechanical solid lifters.
Forged steel, nitride hardened surface, HRC 50.
Installed follower height to camshaft must be adjusted with lash caps (not included).

189,00 €
Audi / VW 1.8-2.0 20V FCP racing solid lifters (followers, tappets)

Lifter data:
20 pcs. FCP Engineering mechanical racing solid lifters.
Forged steel, nitride hardened surface, HRC 50.
Installed tappet height to camshaft must be adjusted with lash caps (not included).
Lifter adjustment requires:
12pcs. 6mm lash caps
8pcs. 7mm lash caps


Intake lifter data (12 pcs.):
Outer diameter - 23.97mm
Inner diameter - 23.97mm
Outer height - 24.20mm
Stem length - 15.00mm
Stud diameter - 6.00mm
Weight - 26g

Exhaust lifter data (8 pcs.):
Outer diameter - 33.47mm
Inner diameter - 31.50mm
Outer height - 26.00mm
Stem length - 15.00mm
Stud diameter - 7.00mm
Weight - 43g

375,00 €
Audi S4 RS4 2.7 2.8 3.0 V6 30V FCP racing solid lifters (cam followers)

Lifter data:
30 pcs. FCP Engineering mechanical racing solid lifters.
Forged steel, nitride hardened surface, HRC 50.
Installed tappet height to camshaft must be adjusted with lash caps (not included).
Lifter adjustment requires:
18pcs. 6mm lash caps
12pcs. 7mm lash caps


Intake lifter data (18 pcs.):
Outer diameter - 23.97mm
Inner diameter - 23.97mm
Outer height - 24.20mm
Stem length - 15.00mm
Stud diameter - 6.00mm
Weight - 26g

Exhaust lifter data (12 pcs.):
Outer diameter - 33.47mm
I
nner diameter - 31.50mm
Outer height - 26.00mm
Stem length - 15.00mm
Stud diameter - 7.00mm

Weight - 43g

499,00 €
VW 2.8 2.9 12V VR6 FCP racing solid lifters (cam followers, tappets)
Lifter data:
Outer diameter - 34.97mm

Inner diameter - 33.10mm
Outer height - 26.30mm
Stem length - 14.70mm
Stud diameter - 7.00mm
Weight - 50g
12 pcs. FCP Engineering racing mechanical solid lifters.
Forged steel, nitride hardened surface, HRC 50.
Installed follower height to camshaft must be adjusted with lash caps (not included).
225,00 €
1 2