Mini

Mini Cooper 1.6 16V W11B16 King Racing connecting rod bearings CR4600XP-STD

Pairs & PN

XP	XP

C4600-PR	C4600-PR

Quantity

4

Crankshaft

46.007 / 45.992

Housing

48.999 / 49.019

Max Wall

1.488

Max Length

17.351

Engines Mini 1.6 16V (W11B16)

99,00 €

BMW / Mini N14B16C King Racing thrust washers kit TW1046AM

0,00 €

Permatex Ultra Slick assembly lubricant for engine bearings 118ml (12 pcs.)

120,00 €

Kolbenschmidt plain bearing measuring tape/plastic gauge 50009880

Part number 50009880.
Kolbenschmidt plain bearing measuring tape / plastic gauge kit (10 pcs.).
Measuring strips for the determination of bearing clearance for plain bearings

13,00 €

Careco Slick Slick assembly lubricant for engine bearings 200ml 3082003

15,00 €

ACL plain bearing measuring tape/flexigauge AR-1 (Red)

1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.

19,36 €