кликните сюда открыть старую версию сайта
Все категории
Parts by Car
Go
Parts by Car
Go

Audi 200 S2 S4 RS2 2.5 2.6 20V Stroker FCP H-beam steel connecting rods 159mm

Part number FCPRHA15950622-5
FCP Engineering H-beam steel connecting rods kit (5 pcs.) 159mm
Audi S2, S4, S6, RS2, 200, Quattro - 2.5 2.6 20V Stroker

489,00 €
Доступность:2 шт.
Информация

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHA15950622-5
Profile: H-beam
C to C: 159mm
Big end diameter: 50.6mm
Pin diameter: 22mm
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 800HP (5 cylinder)
Advertised RPM rating: 9000RPM
 
Audi Quattro, 200, S2, RS2, S4, S6 - 2.5 2.6 20V Stroker

Engine setup: 2.5 TDi 236mm block with 95.5 crankshaft and 2.2T 20V stroker pistons

Вам также может понравиться

Audi 2.2T 2.3 20V 3B AAN 7A King Racing main bearings MB605XP-STD
Position 1,2,3,4,5,6
Pairs & PN
XP XP
1091.jpg 1053.jpg
M 601U-PR M 601L-PR
Quantity  6
Crankshaft  57.978 / 57.958
Housing  63.000 / 63.017
Max Wall  2.499
Max Length  18.471
Engines: Audi 5 cylinder engines - 2.2T, 2.3 20V (3B, AAN, ADU, ABY, 7A)
109,00 €
Audi S2 RS2 S4 S6 2.2 2.3 20V AAN ABY 3B 7A FCP racing valve spring and...
Valve springs data
Installed seat pressure - 38kg

Load - 100kg@12.5mm
Max. lift - up to 13mm
Made from chrome-silicon steel SAE9254-V

20 pcs. outer springs
20 pcs. inner springs
20 pcs. titanium retainers
Fits 5 cylinder 20V Audi engines 3B, AAN, ABY, ADU, RR, 7A.
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7600 RPM.
Titanium retainers are very strong and light, they help to eliminate valve float. Weight is only 10g.
449,00 €
Audi 20V 5 cylinder stroker M12 ARP cylinder head stud kit 204-2.5STR
ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.
309,00 €
Audi S2 RS2 2.2T 20V Athena Cooper Ring cylinder head gasket 83.5x1.6mm 330047R
Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number 330047R
Gasket thickness: 1.60mm
Bore size: 83.50mm


Part number starting with 330

Athena advantages

Reinforced material

Asbestos free composite raw material OE approved

Stainless steel ring (AISI304)

Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required

Silicon beading

Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

275,00 €
Audi 2.2T 20V AAN 3B Athena Cooper Ring cylinder head gasket 82x1.6mm 330048R
Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number 330048R
Gasket thickness: 1.60mm
Bore size: 82.00mm


Part number starting with 330

Athena advantages

Reinforced material

Asbestos free composite raw material OE approved

Stainless steel ring (AISI304)

Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required

Silicon beading

Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

  
275,00 €
Audi S2 RS2 2.5 20V Turbo Stroker FCP forged pistons 81.50mm CR 8.5

Part number: FCPPASTR815085/5
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 81.50mm
Compression ratio (CR): 8.5:1
Compression height: 29.00 mm
Pin diameter: 22mm
Stroke: 95.50mm with 236mm diesel engine block
Audi 200, S2, RS2, S4, S6 - 2.2 2.5 20V Turbo
Connecting rod length must 159mm


849,00 €
Audi S2 RS2 2.5 20V Turbo Stroker FCP forged pistons 82mm CR 8.5
Part number: FCPPASTR820085/5
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 81.50mm
Compression ratio (CR): 8.5:1
Compression height: 29.00 mm
Pin diameter: 22mm
Stroke: 95.50mm with 236mm diesel engine block
Audi 200, S2, RS2, S4, S6 - 2.2 2.5 20V Turbo

Connecting rod length must 159mm

849,00 €
Audi S2 RS2 2.5 20V Turbo Stroker FCP forged pistons 82mm CR 9.5
Part number: FCPPASTR820095/5
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 81.50mm
Compression ratio (CR): 9.5:1
Compression height: 29.00 mm
Pin diameter: 22mm
Stroke: 95.50mm with 236mm diesel engine block
Audi 200, S2, RS2, S4, S6 - 2.2 2.5 20V Turbo
Connecting rod length must 159mm
849,00 €
Audi S2 RS2 2.5 20V Turbo Stroker FCP forged pistons 81.5mm CR 9.5
Part number: FCPPASTR815095/5
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 81.50mm
Compression ratio (CR): 9.5:1
Compression height: 29.00 mm
Pin diameter: 22mm
Stroke: 95.50mm with 236mm diesel engine block
Audi 200, S2, RS2, S4, S6 - 2.2 2.5 20V Turbo
Connecting rod length must 159mm
849,00 €