Audi / VW

Audi RS6 C5 4.2 40V V8 BITURBO JE forged pistons CR 9.5 84.5mm

Product detailed specification
Bore size	84.50mm
Stroke	93.00mm
JE Pistons compression ratio (CR)	9.5:1
Dome volume (CC)	-12cm³
Compression height (CH)	31.78mm
Pin diameter	21mm
Features	Accepts Turbo and Nitrous; HD pins
Fits for	Audi RS6 C5 - 4.2 40V V8 Biturbo (BCY, BRV)

€2,699.00

AUDI R8, Lamborghini Gallardo 5.2 40V V10 JE Pistons kit 84.50mm CR 10.5 361281

Product detailed specification
Bore size	84.50mm
Stroke	92.8mm
JE Pistons compression ratio (CR)	10.5:1
Dome volume (CC)	-3.7cm³
Compression height (CH)	27.6mm
Pin diameter	20mm
Features	Skirt coating; HD pins
Fits for	Audi R8 - 5.2 V10

€2,449.00

Audi RS6 C5 4.2 V8 Biturbo FCP H-beam steel connecting rods 154mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHA15456821-8
Profile: H-beam
C to C: 154mm
Big end diameter: 56.8mm
Pin diameter: 21mm
Quantity: 8 pcs., 16 pcs. ARP2000 5/16" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1000HP (8 cylinder)
Advertised RPM rating: 9000RPM
Audi RS6 C5 V8 - 4.2 Biturbo (BCY, BRV)

€1,098.99

Audi RS6 C6 5.0 V10 BITURBO FCP H-beam steel connecting rods 153mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRH153588322
Profile: H-beam
C to C: 153mm
Big end diameter: 58.83mm
Pin diameter: 22mm
Quantity: 6 pcs., 12 pcs. ARP2000 5/16" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1500HP+
Advertised RPM rating: 9000RPM
Audi RS6 C6 - 5.0 V10 Biturbo (BUH)

€1,209.00

Audi R8 / Lamborghini Gallardo V10 5.2 King Racing connecting rod bearings...

€375.00

Audi R8 / Lamborghini Gallardo V10 5.0 5.2 King Racing connecting rod...

€375.00

Audi / VW 2.5 TDi (not PD/CR) FCP valve spring set

Valve springs data
Installed seat pressure - 38kg
Load - 100kg@12.5mm
Max. lift - up to 13mm
Made from chrome-silicon steel SAE9254-V
10 pcs. outer springs
10 pcs. inner springs
Fits 5 cylinder 10V Audi / VW 2.5TDi engines.
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7500 RPM.

€125.01

AUDI / VW 1.9 2.0 TDI PD FCP Racing camshaft set

Set includes:
1 FCP Engineering racing camshaft (Duration 276°, Lift 9.5mm)
8 INA solid lifters
10 Glyco camshaft bearings
1 Victor Reinz camshaft seal

€549.00

AUDI / VW / Seat / Skoda 1.9 8V TDI VE FCP Racing camshaft

Set includes:
1 FCP Engineering racing camshaft (Duration 260°, Lift 9.9mm)

€299.00

AUDI / VW 1.9 2.0 TDI PD FCP Racing camshaft

Set includes:
1 FCP Engineering racing camshaft (Duration 276°, Lift 9.5mm)

€399.00

VW / Audi 1.8 20V, 2.0 16V, 2.2T 20V, 1.9 2.5 TDI ARP M10 Main Bolt

8740 Chrome Moly: Until the development of today’s modern alloys, chrome moly was popularly considered a high strength material. Now viewed as only moderate strength, 8740 chrome moly is seen as a good tough steel, with adequate fatigue properties for most racing applications, but only if the threads are rolled after heat-treatment, as is the standard ARP production practice. Typically, chrome moly is classified as a quench and temper steel, that can be heat-treated to deliver tensile strengths between 180,000 and 210,000 psi

€11.00

VAG 1.8-2.0 16V, 1.8T 20V, 1.9TDI ARP main stud kit 204-1.8MSK

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€179.00