Electronics

Enjoy the highest output on today’s market with Walbro's new DCSS 39/50 in-tank fuel pump. Able to support an aggressive 700+ horsepower, with a super charger, this innovative dual pumping channel design delivers maximum pressure with superior fuel flow. Operating in both petrol and E85, this fuel pump comes with a check valve to avoid system leak-down and extended cranking at start-up. This superior design results in improved hot fuel flow, as well as minimal noise, increasing efficiency by 20% over conventional pumps, delivering unparalleled performance.

Specifications:

• Fuel: Petrol & E85
• Horsepower: 900+ at 60PSI, naturally aspirated applications
• Over All Pump Length: 131mm
• Main Housing Diameter: 39mm
• Lower Housing Diameter: 50mm
• Fuel Inlet Diameter: 11mm OD
• Fuel Outlet Diameter: 11mm OD
• Flow Rate: 470lph @ 40psi (120+ gph)
• Test Voltage: 13.5 Volts

- >275l/h @ 5bar
- Supercedes the 0 580 254 044
- Flows ~10% higher than 044 at 7bar
- Weighs 15% less than 044 at 860g
- Current draw similar to 044
- M18x1.5 inlet fitting and M12x1.5 outlet fitting
- External non return valve
- Pressure relief valve 8-10bar
- Not suitable for voltage regulation
- Compatible with Gasoline and Diesel
- Generic use
- Custom applications
- May require custom fittings & adaptors

Walbro 535 lph Competition In Tank Fuel Pump Kit F90000295

• Outperforms all current market in-tank fuel pumps
• Designed for engines with up to 985hp
• Award Winning OE Technology
• High Pressure, High flow performance
• OEM technology designed and developed for E85.
• All pumping components have been validated to OEM specification for approved use in E85/Flex fuel application

Fittings In (mm):- 11
Fittings Out (mm):- 9
Pump:- Ti Automotive (Walbro) F90000295
Voltage DC:- 12
Pulse Width Modulation Compatible:- Yes
One Way Valve:- No
Flow Ltr/Hr (Max):- 535
Flow Ltr/Hr @ 3 Bar (44psi):- 456
Flow Ltr/Hr @ 5 Bar (73psi):- 336
Max Pressure (Bar):- 7.9

Length (mm):- 130
Diameter (mm):- 50 / 39
Weight (Kg):-0.430

• Low Amp Draw
• Capable of handling 1000hp+ under standard operating conditions

Fittings In (mm):-19
Fittings Out (mm):- 11

Body Diameter :-  38.25mm
Length (Overall) :- 155
Pump:- BKS1002
Voltage DC:- 12
Flow Ltr/Hr (Max):-594
Flow Ltr/Hr @ 3 Bar (44psi):- 525
Flow Ltr/Hr @ 5 Bar (73psi):- 465
Flow Ltr/Hr @ 7 Bar (73psi):- 375
Max Pressure:- 8.2

• Low Amp Draw
• Capable of handling 500hp+ under standard operating conditions
• Design based on Ti Automotive OEM Chevrolet Corvette and Dodge Viper technology

Fittings In (mm):- 11
Fittings Out (mm):- 8
Pump:- GSS352G3
Voltage DC:- 12
Flow Ltr/Hr (Max):-420
Flow Ltr/Hr @ 3 Bar (44psi):- 315
Flow Ltr/Hr @ 5 Bar (73psi):- 235
Max Pressure:- 7.6
Length (mm):- 120
Diameter (mm):- 39.2
Weight (Kg):- 0.366