Tурбо

Turbosystems AUDI A4 / VW PASSAT 1.8T Turbocharger

Bolt-on upgrade turbocharger for Audi A4 and Volkswagen Passat 1.8t petrol engines. 
Equipped with reinforced machined from the solid compressor wheel - 48/60mm. 
Turbine wheel - 48/45mm. 
TurboSystems designed compressor housing and upgraded actuator. 
Reinforced bearings to hold heavy loads. Air intake enlarged to 55mm.

849,00 €

Turbosmart Pro-Gate 50 Lite external wastegate 14psi TS-0502-1240

The Pro-Gate 50 Lite is a new external wastegate that combines big wastegate flow and performance in a compact and lightweight package. It is ideal for applications where performance of a larger wastegate is required but space for turbo components is at a premium, such as aftermarket turbo kits, and for racing applications where every gram counts.
The Pro-Gate 50 Lite features a 50mm valve matched to a compact cap, secured with Turbosmart's unique locking collar allowing for quick spring changes, and a heat shielded, nomex-reinforced diaphragm for excellent heat resistance.
Supplied With:
Inlet and Outlet Stainless Weld Flanges, Inlet and Outlet V-Band Clamps, 1/16 NPT Hose Barbs (5mm), 1/16 NPT Port Blanking Plugs, Locking Collar Tool, Valve Seat, 7psi Middle Spring and 7psi Outer Spring (installed).

628,99 €

Turbosmart GenV Compgate 40 external wastegate 14psi TS-0552-1012

Modular
The 5th series wastegate range has been designed for maximum user-adjustability, without compromising performance. We designed our new unit to allow actuators to be interchangeable across the range. So, if you need a large wastegate in a tight space you can run a smaller actuator on the larger body. Additionally, if you decide to upgrade your new wastegate to a Motorsport or compressed gas-only actuator you can with an upgrade kit.
Adjustability
The unique variable adjustment design allows the wastegate actuator base to be oriented independently from the weld flanges. The cap is also completely independent and indexable in 12 different positions compared to the actuator base and body. This allows the wastegate to be fitted in confined positions without compromising packaging for fittings or aligning the cap.
Upgrades and Servicing
Due to the modular construction, the new range is also upgradeable and completely serviceable, as all components can be removed or upgraded. Components have been tested for over one million cycles so reliability will be rock-solid.
Flow and Thermal Performance
Our new range of wastegates out-flow all competitors thanks to our world-leading engineering and simulation abilities. Thermal performance has been improved drastically compared to our nearest rival, and all wastegates feature liquid cooling ports for further thermal performance if required
Control
For fine-tuning, boost performance, a selection of springs will be supplied with each wastegate. All wastegates feature 1/8″ NPT ports for maximum response and flow while maintaining a high level of compatibility for fittings.

Product features summary:

Modular interchangeable actuators
Independently orientated actuator base
New strap type V band clamps
Increased thermal and flow performance, and;
A diaphragm design that offers linear travel; regardless of spring, pressure and valve positioning, while improving response.
Integrated water cooling ports (if required)

Included in box:

Turbosmart Gen V Wastegate
Valve seat
Inlet V-band clamp
Inlet weld flange
Outlet V-band clamp
Outlet weld flange
Collar tool
Spring kit
Fitting kit

439,00 €

Turbosmart GenV Compgate 40 external wastegate 14psi TS-0552-1011

Modular
The 5th series wastegate range has been designed for maximum user-adjustability, without compromising performance. We designed our new unit to allow actuators to be interchangeable across the range. So, if you need a large wastegate in a tight space you can run a smaller actuator on the larger body. Additionally, if you decide to upgrade your new wastegate to a Motorsport or compressed gas-only actuator you can with an upgrade kit.
Adjustability
The unique variable adjustment design allows the wastegate actuator base to be oriented independently from the weld flanges. The cap is also completely independent and indexable in 12 different positions compared to the actuator base and body. This allows the wastegate to be fitted in confined positions without compromising packaging for fittings or aligning the cap.
Upgrades and Servicing
Due to the modular construction, the new range is also upgradeable and completely serviceable, as all components can be removed or upgraded. Components have been tested for over one million cycles so reliability will be rock-solid.
Flow and Thermal Performance
Our new range of wastegates out-flow all competitors thanks to our world-leading engineering and simulation abilities. Thermal performance has been improved drastically compared to our nearest rival, and all wastegates feature liquid cooling ports for further thermal performance if required
Control
For fine-tuning, boost performance, a selection of springs will be supplied with each wastegate. All wastegates feature 1/8″ NPT ports for maximum response and flow while maintaining a high level of compatibility for fittings.

Product features summary:

Modular interchangeable actuators
Independently orientated actuator base
New strap type V band clamps
Increased thermal and flow performance, and;
A diaphragm design that offers linear travel; regardless of spring, pressure and valve positioning, while improving response.
Integrated water cooling ports (if required)

Included in box:

Turbosmart Gen V Wastegate
Valve seat
Inlet V-band clamp
Inlet weld flange
Outlet V-band clamp
Outlet weld flange
Collar tool
Spring kit
Fitting kit

439,00 €

Turbosmart GenV Compgate 45 external wastegate 14psi TS-0553-1012

Modular
The 5th series wastegate range has been designed for maximum user-adjustability, without compromising performance. We designed our new unit to allow actuators to be interchangeable across the range. So, if you need a large wastegate in a tight space you can run a smaller actuator on the larger body. Additionally, if you decide to upgrade your new wastegate to a Motorsport or compressed gas-only actuator you can with an upgrade kit.
Adjustability
The unique variable adjustment design allows the wastegate actuator base to be oriented independently from the weld flanges. The cap is also completely independent and indexable in 12 different positions compared to the actuator base and body. This allows the wastegate to be fitted in confined positions without compromising packaging for fittings or aligning the cap.
Upgrades and Servicing
Due to the modular construction, the new range is also upgradeable and completely serviceable, as all components can be removed or upgraded. Components have been tested for over one million cycles so reliability will be rock-solid.
Flow and Thermal Performance
Our new range of wastegates out-flow all competitors thanks to our world-leading engineering and simulation abilities. Thermal performance has been improved drastically compared to our nearest rival, and all wastegates feature liquid cooling ports for further thermal performance if required
Control
For fine-tuning, boost performance, a selection of springs will be supplied with each wastegate. All wastegates feature 1/8″ NPT ports for maximum response and flow while maintaining a high level of compatibility for fittings.

Product features summary:

Modular interchangeable actuators
Independently orientated actuator base
New strap type V band clamps
Increased thermal and flow performance, and;
A diaphragm design that offers linear travel; regardless of spring, pressure and valve positioning, while improving response.
Integrated water cooling ports (if required)

Included in box:

Turbosmart Gen V Wastegate
Valve seat
Inlet V-band clamp
Inlet weld flange
Outlet V-band clamp
Outlet weld flange
Collar tool
Spring kit
Fitting kit

545,00 €

Turbosmart GenV Compgate 45 external wastegate 14psi TS-0553-1011

Modular
The 5th series wastegate range has been designed for maximum user-adjustability, without compromising performance. We designed our new unit to allow actuators to be interchangeable across the range. So, if you need a large wastegate in a tight space you can run a smaller actuator on the larger body. Additionally, if you decide to upgrade your new wastegate to a Motorsport or compressed gas-only actuator you can with an upgrade kit.
Adjustability
The unique variable adjustment design allows the wastegate actuator base to be oriented independently from the weld flanges. The cap is also completely independent and indexable in 12 different positions compared to the actuator base and body. This allows the wastegate to be fitted in confined positions without compromising packaging for fittings or aligning the cap.
Upgrades and Servicing
Due to the modular construction, the new range is also upgradeable and completely serviceable, as all components can be removed or upgraded. Components have been tested for over one million cycles so reliability will be rock-solid.
Flow and Thermal Performance
Our new range of wastegates out-flow all competitors thanks to our world-leading engineering and simulation abilities. Thermal performance has been improved drastically compared to our nearest rival, and all wastegates feature liquid cooling ports for further thermal performance if required
Control
For fine-tuning, boost performance, a selection of springs will be supplied with each wastegate. All wastegates feature 1/8″ NPT ports for maximum response and flow while maintaining a high level of compatibility for fittings.

Product features summary:

Modular interchangeable actuators
Independently orientated actuator base
New strap type V band clamps
Increased thermal and flow performance, and;
A diaphragm design that offers linear travel; regardless of spring, pressure and valve positioning, while improving response.
Integrated water cooling ports (if required)

Included in box:

Turbosmart Gen V Wastegate
Valve seat
Inlet V-band clamp
Inlet weld flange
Outlet V-band clamp
Outlet weld flange
Collar tool
Spring kit
Fitting kit

545,00 €

Diaphragm assembly for Turbosmart WG38/40/45 TS-0505-3006

Included with:
Diaphragm assembly
3 grub screws (pre-installed)
Allen key
Sealing gasket
Circlip

89,00 €

Turbosmart Pro-Gate 50 Lite external wastegate 14psi Black TS-0502-1241

The Pro-Gate 50 Lite is a new external wastegate that combines big wastegate flow and performance in a compact and lightweight package. It is ideal for applications where performance of a larger wastegate is required but space for turbo components is at a premium, such as aftermarket turbo kits, and for racing applications where every gram counts.
The Pro-Gate 50 Lite features a 50mm valve matched to a compact cap, secured with Turbosmart's unique locking collar allowing for quick spring changes, and a heat shielded, nomex-reinforced diaphragm for excellent heat resistance.
Supplied With:
Inlet and Outlet Stainless Weld Flanges, Inlet and Outlet V-Band Clamps, 1/16 NPT Hose Barbs (5mm), 1/16 NPT Port Blanking Plugs, Locking Collar Tool, Valve Seat, 7psi Middle Spring and 7psi Outer Spring (installed).

628,99 €

Turbosmart Gen-V WG60 Power-Gate 60 14psi Black TS-0555-1012

The Gen-V WG60 Power-Gate60 external wastegate is a cost effective, high performing 60mm external wastegate, the largest in the Gen-V range.

The Gen-V provides extensive user configurability, world leading extended thermal performance, fatigue resistance and best in class flow performance for optimum control and longevity.

A direct fit upgrade to all 4th-generation Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, liquid-cooling, 1/8″ NPT ports, and are provided with a range of springs.

Available in Compressed Gas configuration.

Product features summary:
• Class leading thermal performance
• Class leading flow performance
• Liquid cooling provision
• Strap type V-band clamps
• User adjustable actuator position
• Modular actuator design
• Compressed Gas configuration available

Included in the Box:
• Wastegate unit (pre-assembled with spring as per order)
• SS316 Valve seat
• Inlet V-Band
• Inlet SS304 weld flange
• Outlet V-Band
• Outlet SS304 weld flange
• Collar tool (master/slave)
• 17/7 PH 3, 5, 7, 14 psi spring kit (1x spring installed)
• 4x 1/8” NPT plugs (1x installed) / 2x 1/8” NPT nipples
• Sticker
• Instruction card

Beryllium (Be)	0%
Main Body	High temp 347 SS
Diaphragm	Proprietary Silicone w/ nomex
Actuator Housing	6061 T6 anodised Al.
Valve Guide	Nitronic 60
Valve	EV8 w/ proprietary plating
V-Band	Heat treated 431 SS w/ 18-8 nut
Weld Flanges	304 Stainless Steel
Springs	17-7PH Stainless Steel

829,00 €

Turbosmart Gen-V WG60 Power-Gate 60 14psi Blue TS-0555-1011

The Gen-V WG60 Power-Gate60 external wastegate is a cost effective, high performing 60mm external wastegate, the largest in the Gen-V range.

The Gen-V provides extensive user configurability, world leading extended thermal performance, fatigue resistance and best in class flow performance for optimum control and longevity.

A direct fit upgrade to all 4th-generation Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, liquid-cooling, 1/8″ NPT ports, and are provided with a range of springs.

Available in Compressed Gas configuration.

Product features summary:
• Class leading thermal performance
• Class leading flow performance
• Liquid cooling provision
• Strap type V-band clamps
• User adjustable actuator position
• Modular actuator design
• Compressed Gas configuration available

Included in the Box:
• Wastegate unit (pre-assembled with spring as per order)
• SS316 Valve seat
• Inlet V-Band
• Inlet SS304 weld flange
• Outlet V-Band
• Outlet SS304 weld flange
• Collar tool (master/slave)
• 17/7 PH 3, 5, 7, 14 psi spring kit (1x spring installed)
• 4x 1/8” NPT plugs (1x installed) / 2x 1/8” NPT nipples
• Sticker
• Instruction card

Beryllium (Be)	0%
Main Body	High temp 347 SS
Diaphragm	Proprietary Silicone w/ nomex
Actuator Housing	6061 T6 anodised Al.
Valve Guide	Nitronic 60
Valve	EV8 w/ proprietary plating
V-Band	Heat treated 431 SS w/ 18-8 nut
Weld Flanges	304 Stainless Steel
Springs	17-7PH Stainless Steel

829,00 €

Turbosmart Gen-V ALV40 (Anti-Lag Valve) TS-0552-1402

The all-new addition to the Turbosmart line-up is the fresh air ALV40 (Anti-Lag Valve) for motorsport applications. Featuring a 40mm valve diameter and a purpose designed actuator housing. Multiple fittings are also supplied for ease of fitment and fabrication.
The fresh air valve allows for incoming charged fresh air from the turbo to be diverted safely into the exhaust manifold pre-turbine wheel with the throttle at low opening angles to allow for safer spooling of the turbocharger without the potentially damaging throttle based late combustion event style anti-lag that can induce high engine stresses and break connecting rods.
The ALV is a sealed twin chamber design with the top port being the primary control port, the spring is designed to open under vacuum conditions to allow for the air to bypass into the exhaust manifold, the lower chamber for twin port control methods, to control the valve irrespective of manifold pressure and shaft seal allows for leak proof operation.

Included:

Turbosmart Gen-V ALV
Valve Seat
Inlet V-band Clamp
Inlet Hose Adapter 1-1/2" OD
Outlet V-Band Clamp
Inlet Weld Flange 1-1/2" OD
Collar Tool
Fitting Kit
Inlet O-ring

519,01 €

Turbosmart ALV40 Outlet Weld Flange: 4-1 TS-0550-3098

56,00 €