Audi / VW

Audi / VW 2.8 2.9 3.2 3.6 King Racing connecting rod bearings CR6764XP-STDX

XP	XP

C6764-PR	C6764-PR

Quantity

6

Crankshaft

53.978 / 53.957

Housing

56.799 / 56.820

Max Wall

1.402

Max Length

16.901

Engines: Audi / VW - 2.8 2.9 3.2 3.6 (BUB, BHK, AES, AUE, ABV, AAA, AMY)

149,00 €

Ecumaster EMU Black VAG R32 BFH interconnector

299,00 €

VW / Audi VR6 R32 Wossner pistons kit 84.50mm CR 9.0 K9094D050

Product detailed specification
Bore size	84.50mm
Stroke	95.90mm
Wossner compression ratio (CR)	9.00:1
OEM compression ratio (CR)	11.70:1
Dome volume (CC)	-19.70cm³
Compression height (CH)	29.50mm
Pin diameter	20mm
Fits for	VW VR6 R32 (BFH, BML, BJS)

1 124,10 €

VW / Audi VR6 R32 Wossner pistons kit 85mm CR 9.0 K9094D100

Product detailed specification
Bore size	85.00mm
Stroke	95.90mm
Wossner compression ratio (CR)	9.00:1
OEM compression ratio (CR)	11.70:1
Dome volume (CC)	-19.70cm³
Compression height (CH)	29.50mm
Pin diameter	20mm
Fits for	VW VR6 R32 (BFH, BML, BJS)

1 249,00 €

VW R32 VR6 Sachs performance RCS200 Sinter 4-pad clutch kit

Single-mass flywheel made from Alloy steel (16MnCr5) designed to work with Sachs Performance RCS200 clutch kit.
Transmittable torque: up to 1300NM
Used with 01E gearbox
Flywheel weight - 4.9kg
Full kit weight - 9.4kg
Kit includes:
1X S4/RS4 60-2 Flywheel
1X Sachs RCS200 Sinter clutch cover
1X Sachs pressure plate
1X Sachs intermediate plate
2X Sachs 4-pad ceramic clutch discs (Friction material thickness - 7.8mm, Hub profile - 23x3.14 VAG (01E/02M/02Q))

2 199,01 €

VW R32 7.5kg 240mm steel flywheel for 6-speed gearboxes

Direct replacement Single-mass flywheel made from Alloy steel (16MnCr5).
Used with 6 gang gearboxes and original or aftermarket clutch kit.
Weight - 7.5kg

Can be used with Sachs Performance clutch cover 883082999760

Clutch disc options:
Organic Sachs Performance (500+ Nm) - 881861999802
4pad ceramic Sachs Performance (up to 700 Nm) - 881861999809
6pad ceramic Sachs Performance (750+ Nm) - 881861000027

349,00 €

VW 2.8 2.9 12V VR6 FCP racing solid lifters (cam followers, tappets)

Lifter data:
Outer diameter - 34.97mm
Inner diameter - 33.10mm
Outer height - 26.30mm
Stem length - 14.70mm
Stud diameter - 7.00mm
Weight - 50g
12 pcs. FCP Engineering racing mechanical solid lifters.
Forged steel, nitride hardened surface, HRC 50.
Installed follower height to camshaft must be adjusted with lash caps (not included).

275,00 €

VW 2.8 12V VR6 FCP racing valve spring and retainer kit

Valve springs data
Installed seat pressure - 38kg
Load - 100kg@12.5mm
Max. lift - up to 13mm
Made from chrome-silicon steel SAE9254-V
12 pcs. outer springs
12 pcs. inner springs
12 pcs. titanium retainers
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7600 RPM.
Titanium retainers are very light and strong, helps eliminate valve float. Weight is only 10g.

299,00 €

VW 2.8 12V VR6 FCP racing valve spring kit

Valve springs data
Installed seat pressure - 38kg
Load - 100kg@12.5mm
Max. lift - up to 13mm
Made from chrome-silicon steel SAE9254-V
12 pcs. outer springs
12 pcs. inner springs
With this set the risk of valve flutter and a possible engine failure is minimized.

149,00 €

FCP 7mm lash cap for solid lifter

Part number FCPLC/7mm.
FCP Engineering lash cap used with solid lifter.
hardness HRC 55, inner diameter 7mm, over deck 5mm.

4,01 €

VW 2.8 2.9 12V VR6 Supertech Inconel exhaust valve VWEVI-1010 +1.8mm

Product detailed specification
Model number	VWEVI-1010
Head diameter	36.00mm
Stem diameter	6.95mm
Length	106.95mm
Material	Inconel
Fits for	VW Corrado, Golf, Passat – 2.8 2.9 12V VR6

39,00 €

VW 2.8 2.9 12V VR6 Supertech exhaust valve VWEVN-1007 STD

Product detailed specification
Model number	VWEVN-1007
Head diameter	34.20mm
Stem diameter	6.95mm
Length	106.95mm
Material	Black nitrided stainless steel
Fits for	VW Corrado, Golf, Passat – 2.8 2.9 12V VR6

28,00 €