
|
|||||||
| Quantity | 6 | ||||||
| Crankshaft | 51.999 / 51.981 | ||||||
| Housing | 55.024 / 55.042 | ||||||
| Max Wall | 1.506 | ||||||
| Max Length | 19.200 |

| Component | M7084/1UPR / M7084/1LPR |
| Min Crankshaft Diameter | 2.440 inch / 61.98mm |
| Max Crankshaft Diameter | 2.441inch / 62.00mm |
| Min Housing Diameter | 2.599 inch / 66.02 mm |
| Max Housing Diameter | 2.600 inch / 66.04 mm |
| Bearing Length | 0.787 inch / 19.99 mm |
| Max Wall Thickness | 0.000 inch / 0.00 mm |
| Component | M7084/2UPR / M7084/2LPR |
| Min Crankshaft Diameter | 2.440 inch / 61.98mm |
| Max Crankshaft Diameter | 2.441inch / 62.00mm |
| Min Housing Diameter | 2.599 inch / 66.02 mm |
| Max Housing Diameter | 2.600 inch / 66.04 mm |
| Bearing Length | 0.906 inch / 23.01 mm |
| Max Wall Thickness | 0.000 inch / 0.00 mm |

| Component | M7084/1UPR / M7084/1LPR |
| Min Crankshaft Diameter | 2.440 inch / 61.98mm |
| Max Crankshaft Diameter | 2.441inch / 62.00mm |
| Min Housing Diameter | 2.599 inch / 66.02 mm |
| Max Housing Diameter | 2.600 inch / 66.04 mm |
| Bearing Length | 0.787 inch / 19.99 mm |
| Max Wall Thickness | 0.000 inch / 0.00 mm |
| Component | M7084/2UPR / M7084/2LPR |
| Min Crankshaft Diameter | 2.440 inch / 61.98mm |
| Max Crankshaft Diameter | 2.441inch / 62.00mm |
| Min Housing Diameter | 2.599 inch / 66.02 mm |
| Max Housing Diameter | 2.600 inch / 66.04 mm |
| Bearing Length | 0.906 inch / 23.01 mm |
| Max Wall Thickness | 0.000 inch / 0.00 mm |

|
|||||||
| Quantity | 6 | ||||||
| Crankshaft | 51.999 / 51.981 | ||||||
| Housing | 55.024 / 55.042 | ||||||
| Max Wall | 1.506 | ||||||
| Max Length | 19.200 |

Length: 1144mm
Width: 25mm
Number of tooth: 143
Gates' timing belts offer a precision fit with easy installation and no interference engine damage - exactly what you've come to expect from the worldwide leader in timing belts.
- Tensile cord reinforced with premium, high-strength glass cords.
- Gripping teeth with aramid fiber technology and high saturation HNBR elastomeric composites for exceptional durability and heat resistance.
- Wear-resistant tooth jacket supported by reinforced nylon fabric and double-tooth stability.
The superior construction of Gates timing belts makes them 300 percent stronger than the standard aftermarket belt while providing up to three times the heat resistance.




|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |

|
Product detailed specification |
|
|
Bore size |
86.50mm |
|
Stroke |
86.00mm |
|
JE Pistons compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
9.0:1 |
|
Dome volume (CC) |
-16.90cm3 |
|
Compression height (CH) |
30.50mm |
|
Pin diameter |
21mm |
|
Features |
Accepts Turbo and Nitrous; FSR series skirt |
|
Fits for |
Opel 2.0 16V (C20LET, C20XE) |

|
Product detailed specification |
|
|
Bore size |
86.50mm |
|
Stroke |
86.00mm |
|
Wiseco compression ratio (CR) |
8.8:1 |
|
OEM compression ratio (CR) |
9.0:1 |
|
Dome volume (CC) |
-13cm3 |
|
Compression height (CH) |
30.49mm |
|
Pin diameter |
21mm |
|
Features |
Round piston skirt |
|
Fits for |
Opel - 2.0 16V (C20LET) |