Clutches

Subaru Impreza WRX STI Gates Racing timing belt T328RB

RallySport Direct proudly carries a great selection of Gates timing belts and timing belt accessories. Gates manufactures their components to meet or exceed the demands of OEM build quality to provide the consumer with a solid product.

Here, you are looking at the Gates Racing Timing Belt. The Racing series are constructed using stronger materials than your conventional Gates timing belt to provide extra durability for high-performance or modified engines.

DETAILS:

Constructed of HNBR electrometric composites
300% stronger than stock belts
Delivers up to 3 times the heat resistance
Blue finish

€209.00

Genuine OEM Subaru WRX STi EJ20 EJ25 Turbo Spec C 12mm oil pump

Once you start adding mods to your vehicle, you can run into oiling issues. Brand new genuine Subaru Spec C part will help you to avoid them. This is a good upgrade for all EJ20 and EJ25 engines.
12mm oil pump flows 20% higher volume than the stock 10mm, also maintains higher pressure at speed. 10-11mm oil pumps can be used only in not modyfied engines.
Spec C oil pump recommended for all turbocharged WRX, STI, LGT, and FXT that are making more than 350hp.
An absolute must if RPM is more than 7000.

€158.99

Subaru WRX STI 2.5 EJ257 Wossner pistons kit 100mm CR 8.0 K9467D050

Product detailed specification
Bore size	100.00mm
Stroke	79.00mm
Wossner compression ratio (CR)	8.0:1
OEM compression ratio (CR)	8.2:1
Dome volume (CC)	-25.30cm³
Compression height (CH)	30.70mm
Pin diameter	23mm
Fits for	Subaru Impreza WRX STI (EJ257)

€749.00

Cometic Subaru EJ205 04-05" DOHC Turbo Complete gasket kit PRO2023C

COMETIC StreetPro Kits cater to the budget-minded street-rodder who is looking to purchase a kit with all necessary gaskets and seals needed for their rebuild. StreetPro gasket kits are sold as a top-end kits and bottom-end kits. Purchase both top- and bottom-end kits for a total engine rebuild. Quality gasket materials are a priority in StreetPro kits. Kit materials include: MLS, AFM, Aramid Fiber, and Armor Clad.

€379.00

Cometic Subaru EJ20GN/EJ205 16v MLS Cylinder Head Gasket kit 93x1mm C4261-040

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€158.99

Cometic Subaru EJ20GN/EJ205 16v MLS Cylinder Head Gasket kit 93x1.14mm C4261-045

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€158.99

Cometic Subaru EJ20GN/EJ205 16v MLS Cylinder Head Gasket kit 93x1.3mm C4261-051

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€158.99

Cometic Subaru WRX STI 2.0 16V EJ20GN EJ205 MLS cylinder head gasket kit...

€158.99

Subaru 2.0 EJ20 Athena Cooper Ring cylinder head gasket set 93.5x1.2mm 330041R

Athena Racing 330 series Cooper Ring cylinder head gasket set.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330041R (2 pcs.)
Gasket thickness: 1.20mm
Bore size: 93.50mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€279.00

Subaru WRX 2.0 EJ20 Athena MLS cylinder head gasket set 94x1.3mm 338001R

Athena Racing 338-series multilayer steel (MLS) cylinder head gasket set.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338001R (2 pcs.)
Gasket thickness: 1.30mm
Bore size: 94.00mm

Part number starting with 338
Athena advantages
Optimized radius embossing shape	The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength
Advanced stopper technology	State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines
Coating technology	Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket

€149.00

Subaru WRX 2.0 EJ20 Athena MLS cylinder head gasket set 94x1mm 338002R

Athena Racing 338-series multilayer steel (MLS) cylinder head gasket set.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338002R (2 pcs.)
Gasket thickness: 1.00mm
Bore size: 94.00mm

Part number starting with 338
Athena advantages
Optimized radius embossing shape	The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength
Advanced stopper technology	State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines
Coating technology	Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket

€149.00

Subaru WRX 2.0 16V EJ20 JE Pistons CR 8.5 92.50mm 314438

Product detailed specification
Bore size	92.50mm
Stroke	75.00mm
JE Pistons compression ratio (CR)	8.5:1
OEM compression ratio (CR)	8.0:1
Dome volume (CC)	-11.7cm³
Compression height (CH)	32.70mm
Pin diameter	23mm
Features	Accepts Turbo and Nitrous; FSR series Skirt
Fits for	Subaru Impreza WRX STI - 2.0 16V (EJ20, EJ205, EJ207)

€899.01