Audi / VW 3.2 R32 24V

VW Golf R32 3.2 VR6 ARP cylinder head stud kit 204-4R32

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

519,00 €

Volkswagen R36 Pro-Series 18.8 cylinder head stud set

The Pro-Series 18.8 sets are high-strength studs made in Germany.
A special steel is used which has a tensile strength of 1850 N/mm² after tempering.
All threads are formed and not cut as commercially available. The so-called "rolling" of threads increases the strength of the tooth flanks by approximately 30%.
All Pro-Series products are supplied with a nickel coating and are therefore protected against long-term corrosion even under the toughest conditions.
A big advantage of Pro-Series over other manufacturers are the nuts and washers included in the set as these also have a tensile strength of 1850 N/mm².

749,00 €

Cometic VW/AUDI VR6 3.2L 24V 2004-09 0.40" MLS Head Gasket 85mm C4968-040

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

129,00 €

Cometic VW/AUDI VR6 3.2L 24V 2004-09 0.51" MLS Head Gasket 85mm C4968-051

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

129,00 €

Cometic VW/AUDI VR6 3.2L 24V 2004-09 0.75" MLS Head Gasket 85mm C4968-075

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

159,00 €

VW 2.8 2.9 12V VR6 Athena MLS cylinder head gasket 84.1x0.65mm 338320R

Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product.
The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338320R
Gasket thickness: 0.65mm
Bore size: 84.10mm

Part number starting with 338
Athena advantages
Optimized radius embossing shape	The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength
Advanced stopper technology	State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines
Coating technology	Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket

255,00 €

VW / Audi TT 3.2 24V VR6 R32 JE Pistons CR 8.5 84mm 279946

Product detailed specification
Bore size	84.00mm
Stroke	95.90mm
JE Pistons compression ratio (CR)	8.5:1
OEM compression ratio (CR)	11.3:1/10.9:1
Dome volume (CC)	-27.00cm³
Compression height (CH)	34.50mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous; Full round skirt
Fits for	Golf 4 R32 Turbo (BFH / BML / BJS)

1 059,00 €

VW / Audi 3.2 24V VR6 R32 JE Pistons CR 8.5 84.5mm 279947

Product detailed specification
Bore size	84.50mm
Stroke	95.90mm
JE Pistons compression ratio (CR)	8.5:1
OEM compression ratio (CR)	10.9:1/11.3:1
Dome volume (CC)	-27.80cm³
Compression height (CH)	34.50mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous; Full round skirt
Fits for	VW / Audi 3.2 24V R32

1 059,00 €

VW / Audi 3.2 24V VR6 R32 JE Pistons CR 11.5 84.5mm 279950

Product detailed specification
Bore size	84.50mm
Stroke	95.90mm
JE Pistons compression ratio (CR)	11.5:1
OEM compression ratio (CR)	10.9:1/11.3:1
Dome volume (CC)	-7.40cm³
Compression height (CH)	34.50mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous; Full round skirt
Fits for	VW / Audi 3.2 24V R32

1 059,00 €

VW / Audi 3.2 24V VR6 R32 JE Pistons CR 11.5 84mm 279949

Product detailed specification
Bore size	84.00mm
Stroke	95.90mm
JE Pistons compression ratio (CR)	11.5:1
OEM compression ratio (CR)	10.9:1/11.3:1
Dome volume (CC)	-6.80cm³
Compression height (CH)	34.50mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous; Full round skirt
Fits for	VW / Audi 3.2 24V R32

JE's patented Perfect Skirt coating makes piston slap, false knock, and cold-start wear a thing of the past.
For the first time ever, 2618-alloy pistons can be installed with piston-to-wall clearances near that of an OEM piston!

1 119,00 €

VW / Audi 3.6 24V R36 forged JE Pistons kit CR 9.0 89mm 318328C

Product detailed specification
Bore size	89.00mm
Stroke	96.40mm
JE Pistons compression ratio (CR)	9.0:1
OEM compression ratio (CR)	11.4:1
Dome volume (CC)	-21.20cm³
Compression height (CH)	31.12mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous
Fits for	Audi / VW - 3.6 R36 24V Turbo (BWS, BHK, CDVA)

1 359,00 €

VW / Audi 3.2 24V VR6 R32 Mahle Piston kit CR 9.0 84.5mm 930016626

Product detailed specification
Bore size	84.50mm
Stroke	95.90mm
Mahle compression ratio (CR)	9.0:1
OEM compression ratio (CR)	11.3:1/10.9:1
Dome volume (CC)	-23.00cm³
Compression height (CH)	34.70mm
Pin diameter	20mm
Features	2618 alloy
Fits for	Golf 4 R32 Turbo (BFH / BML / BJS)

1 199,00 €